SZG-1500 DOUBLE CONICAL ROTARY VACUUM DRYER
Application
SZG Series Double cone Rotating Vacuum Dryer is a new generation
drying device developed by our factory on the basis of combining
the technology of similar equipment. It has two connecting ways,
belt connection and chain connection. Therefore, the dryer is
stable in operation. The special design guarantees two shafts
realize good concentricity. The heat medium and vacuum system all
adapt reliable rotating connector with the technology from USA. On
this basis, we also developed SZG-A. It can carry out steeples
speed change and constant temperature control
Work Principle
1. When the heat source (hot water, low pressure steam, or thermal
oil) pass through the sealed jacket, the heat will be transmitted
to raw material through the inner shell;
2. Under action of driving power, the tank is rotated slowly and
the raw material is mixed continuously. The purpose of reinforced
drying can be realized
3. The raw material is under vacuum condition. When steam pressure
is dropping, it makes the moisture (solvent) at the surface of raw
material become saturation and then evaporates. The solvent will be
discharged through vacuum pump.
4. The moisture (solvent) of raw material will infiltrate,
evaporate and discharge continuously.
5. The production processes are carried out continuously and the
drying can be done in a short time.
Features
1. This rotary vacuum dryer has advanced design, simple internal
structure, convenient to clean and easy to handle.
2. The tubes of heating medium and vacuum system are built in the
rack in order to prevent artificial damage and difficult clean.
3. The outer wall and rack sealing plate adopt polishing treatment,
and the inner container adopts mirror polishing treatment.
4. The materials in the double cone vacuum dryer can be rotated due
to the revolution of the machine, which can minimize material water
content (≤0.5%).
5. The materials will not stick to the wall of the container. With
big drying rate and energy saving, this rotary vacuum dryer can
uniformly and sufficiently dry the materials.
6. Condenser and recycling tank are equipped for recovering organic
solvent.
7. Our double cone vacuum dryer has three types of heat source,
including steam, hot water and conduction oil.
Technical Parameters
| Model | SZG-100 | SZG-350 | SZG-500 | SZG-750 | SZG-1000 | SZG-1500 | SZG-2000 |
| Total volume (L) | 100 | 350 | 500 | 750 | 1000 | 1500 | 2000 |
| Loading volume (L) | ≤50 | ≤ 175 | ≤ 250 | ≤ 375 | ≤ 500 | ≤ 750 | ≤ 1000 |
| Rotary speed (r/min) | 3-13 |
| Motor power (kw) | 0.75 | 1.1 | 1.5 | 2 | 3 | 3 | 4 |
| Rotary height (m) | 1.75 | 2.1 | 2.25 | 2.49 | 2.8 | 2.94 | 2.99 |
| Tank inner pressure (Mpa) | -0.1-0.15 |
| Clip set pressure (Mpa) | ≤ 0.3 |
| Working temp.(°C) | Inner tank ≤ 85 Clip set ≤ 140 |
| Heating media | Steam, Hot water, Heat transfer oil |
| Weight (kg) | 800 | 1100 | 1200 | 1500 | 2800 | 3300 | 3600 |
| Floor area (L*W) | 2160*800 | 2260*800 | 2350*800 | 2550*1000 | 2860*1300 | 3260*1400 | 3760*1800 |
Machine parts pictures
Shipping and Delivery
Raw Material
Previous Exhibition
Service Flow
pre-sale service
We Invite customers to visit our company and communicate on
technical requirements face to face.
sale service
Responsible for debugging the equipment according to customers'
requirements of various technical data. Our engineers will train
our customers about equipment features and operation key points to
make sure the equipment running in the best condition.
after-sale service
We provide installation, debugging, maintenance, training and other
services; Provide relevant technical data, equipment, software and
related GMP certification materials;Set up after-sales service
hotline, and arrange personnel to visit customers every year to
know more customer needs,like customer operation problems in the
process of production equipment.
quality promise
Our company promises strictly operate the ISO9001 quality system
certification standards and pharmaceutical equipment GMP audit
requirements,promise we provide new equipment. Advanced
technology,good quality.Equipment operation safe reliable,
affordable, easy to maintain.
Equipment warranty period is one year,all the parts for the
equipment choose well-known brand.During the warranty when
equipment have problem in quality like equipment failure and
damage,the company for free maintenance or replacement.
Why choose us
1.Specialized in designing, developing and manufacturing.
2.Above 130 National patents,national and provincial technology
innovation awards
3.Provincial Pharma Equipment Engineering Technology Research
Center
4.National High-Tech,National Pharma Equipment Industry
Association,Provincial new special expertise Enterprises
5.Manufacture the solid preparation production line equipment for
above 500 domestic and oversea enterprises
6.Modern production workshop and production line of high-end
manufacturing equipment
7.Professional and efficient after-sales service management
8.Competitive price and prompt delivery
9.Meet ISO9001 and CE
10.OEM/ODM available
Company View
Company introduction: Changzhou Hansheng Drying Equipment Co., Ltd.
Changzhou Hansheng Drying Equipment Co.,Ltd has established in 2011
and it covers an area of 15000 square meters, possesses fixed asset
of USD 5 million. The products have exported to US, Singapore,
India, Ukraine, Russia, Korea and so on. The company have advanced
production equipment , excellent technical team and after-sales
service.
FAQ:
1. Q: Please describe your warranty period.
A: 15 months after the equipment is arrived at the destination port
or 12 months after the installation and commissioning of the
equipment, whichever comes first.
2. Q: Do you provide on-site installation and commissioning?
A: Yes, we do. If on request, we'll provide the guidance of on-site
installation and commissioning. Usually one mechanical engineer and
one electrical engineer to assist.
3. Q: How about the cost of on-site installation and commissioning
guidance?
A: The cost consists of round-trip air tickets, room and board
expenses, service cost (labor cost), and site transportation (or
directly provided by client), which shall be paid additionally.
4. Q: Are you a factory or a trading company?
A: We are a professional manufacturer. We have own factory and
pilot plant for customers to do sample testing.
